Hospital Furniture

SZA-01 Rehabilitative beds

SZA-01

Patient beds are divided into 2 parts with fixed-height metal frame construction, mechanically from 0 until 50 degrees, in 6-position adjustable head part, with metal slats, beech laminate tiles covering furniture, head ends. Size of the lying surface: 90x200cm, height 45cm (without mattress) in fixed and roller (SZA-01G) versions available. Suitable for home and a sanatorium use. Optional available (for the bed): patient's bedside handrail, bedding holder, mattresses.

SZA-02

SZA-02 Rehabilitative beds

Patient beds are divided into 2 parts with fixed-height metal frame construction, mechanically from 0 until 50 degrees, in 6-position adjustable head part, with metal slats, beech laminate tiles covering furniture, head ends, a foot end, with a height-adjustable wooden side rails. Size of the lying surface: 90x200cm, height 45cm (without mattress) in fixed and roller (SZA-02G) versions available. Suitable for home and a sanatorium use. Optional available (for the bed): patient's bedside handrail, bedding holder, mattresses.

SZA-03

SZA-03 Rehabilitative beds

Patient beds are divided into 2 parts with fixed-height metal frame construction, mechanically from 0 until 50 degrees, in 6-position adjustable head part, with metal slats, beech laminate tiles covering furniture, head end, foot end, with a wall protecting furniture panel with cover side. Size of the lying surface: 90x200cm, height 45cm (without mattress) in fixed and roller (SZA-03G) versions available. Suitable for home and a sanatorium use. Optional available (for the bed): patient's bedside handrail, bedding holder, mattresses.

VITAL-MV

VITAL-MV Lift bed

Liftable patient's bed, with reclining backrest up to 0-75 degree, the leg part can be raised and bent 250 mm, in 10 levels, the lying surface is divided into 4 parts, size: 200x90cm, with a 5x5cm's grid structure metal mattress holder. The head and footboard is with beech decor paneling, with open bed end and retractable metal side rails on both sides. Setting of the height is between 40-80 cm. Moving of the bed is possible by lockable, large wheels. The bed comes with an easy to use, handheld control unit.Optional available (for the bed): patient's bedside handrail, side rail, extension frame, bedding holder, mattresses.

VITAL-EMV

VITAL-EMF Lift bed

Liftable patient's bed, with reclining backrest up to 0-75 degree, the leg part can be raised and bent 250 mm, in 10 levels, the lying surface is divided into 4 parts, size: 200x90cm, with a 8x5cm's grid structure metal mattress holder. The head and footboard is with beech decor paneling, with closed bed end and retractable beech decor side rails on both sides. Setting of the height is between 40-80 cm. Moving of the bed is possible by lockable, large wheels. The bed comes with an easy to use, handheld control unit.Optional available (for the bed): patient's bedside handrail, side rail, extension frame, bedding holder, mattresses.

SZA-08 Rehabilitative beds

SZA-08 Rehabilitative beds

Patient beds are divided into 2 parts with fixed-height metal frame construction, mechanically from 0 until 50 degrees, in 6-position adjustable head part, with metal slats, beech laminate tiles covering furniture, with curved head end and foot end, with a height-adjustable wood side rails on both sides. Size of the lying surface: 90x200cm, height 45cm (without mattress) in fixed and roller versions available. Suitable for home and a sanatorium use. Optional available (for the bed): patient's bedside handrail, bedding holder, mattresses.

SZA-09

SZA-09 Rehabilitative beds

Patient beds are divided into 2 parts with fixed-height metal frame construction, mechanically from 0 until 50 degrees, in 6-position adjustable head part, with metal slats, beech laminate tiles covering furniture, with curved head end and foot end, with a height-adjustable metal side rails on both sides. Size of the lying surface: 90x200cm, height 45cm (without mattress) in fixed and roller versions available. Suitable for home and a sanatorium use. Optional available (for the bed): patient's bedside handrail, bedding holder, mattresses.

Rehabilitation beds

Electric rehabilitation beds

Height and sectional transporting, settings of the beds are remote-controlled with electric motor. The option of vertical movement in a wide size range provides the opportunity for convenient height adjustment, both in terms of the patient and the nurse.

Elevator beds

Elevator lift beds

Patient's bed operated by an electric motor, with lift pallet structure. The lying surface is divided into 4 parts. The split backrest of lying surface is tiltable, the footrest can be raised and in 6 levels flexible. The lying surface is vertically adjustable between varying heights. Moving the head and foot part, and the setting of the lying surface height are remote-controlled with an electric motor. The bed's load-bearing structure is a metal frame welded from a hollow sections, which surface is coated with electrostatic powder coating. The lying surface is made of steel grid reticulated design. Moving of the bed is possible by lockable, large wheels. The elevator lifting device allows the adjustment of the Trendelenburg and Antitrendelenburg position.

VITAL-MF

VITAL-MF Lift bed

Liftable patient's bed, with reclining backrest up to 0-75 degree, the leg part can be raised and bent 250 mm, in 10 levels, the lying surface is divided into 4 parts, size: 200x90cm, with a 5x5cm's grid structure metal mattress holder. The head and footboard is with beech decor paneling, with closed bed end and retractable beech decor side rails on both sides. Setting of the height is between 40-80 cm. Moving of the bed is possible by lockable, large wheels. The bed comes with an easy to use, handheld control unit.Optional available (for the bed): patient's bedside handrail, side rail, extension frame, bedding holder, mattresses.

VITAL-EMF Bed

VITAL-EMF Lift Bed

Liftable patient's bed, with reclining backrest up to 0-75 degree, the leg part can be raised and bent 250 mm, in 10 levels, the lying surface is divided into 4 parts, size: 200x90cm, with a 8x5cm's grid structure metal mattress holder. The head and footboard is with beech decor paneling, with closed bed end and retractable beech decor side rails on both sides. Setting of the height is between 40-80 cm. Moving of the bed is possible by lockable, large wheels. The bed comes with an easy to use, handheld control unit.Optional available (for the bed): patient's bedside handrail, side rail, extension frame, bedding holder, mattresses.

VITAL-AF

VITAL-AF Lift bed

Liftable, in low-position adjustable bed, with reclining backrest, the leg part can be raised and bent, the lying surface is divided into 4 parts, size: 200x90cm, with a 5x5cm's grid structure metal mattress holder. With closed bed end and beech decor side rails. Setting of the height: between 20-60 cm, optional available: handhold console, central brake, mattresses.

VITAL-A5

VITAL-A5 Lift bed

Liftable, in low-position adjustable bed with 5 section lying surface, with reclining backrest, the leg part can be raised and bent, the lying surface is divided into 5 parts, size: 200x90cm, with a 5x5cm's grid structure metal mattress holder, headrest and mattress retraction function, with closed bed end and without side rails. Setting of the height: between 22-61 cm, optional available: handhold console, central brake, health mattress, side rail.

ERIGO-F

ERIGO-F Scissor lift beds

Scissor lifting structured bed with a tiltable backrest up to 75 degrees, the footrest is bendable and can be raised up to 45 degrees, knee flexion in 6-ways, The lying surface is divided into 4 parts, size: 200x90cm, mattress holder. The head and footboard is with beech decor paneling, with retractable beech decor side rails on both sides. The load capacity of the motors is 6,000N. The reliable operation of electrical components are protected against moisture ingress (IPX4). The electrical movement can be controlled by remote control accessory, whose operation can be disabled on request, can be switched to "can not be controlled by the patient" mode. Setting of the height is between 400-800 mm. Optional available (for the bed): patient's bedside handrail, extension frame, bedding holder, mattresses.

ERIGO-S

ERIGO-S Scissor lift beds

Scissor lifting structured bed with a tiltable backrest up to 75 degrees, the footrest is bendable and can be raised up to 45 degrees, knee flexion in 6-ways, the lying surface is divided into 4 parts, size: 200x85cm, 5x5cm's grid structure metal mattress holder. The head and footboard is with beech decor paneling. Capacity: 190 kg, the weight of the bed without a mattress approx. 115 kg, overall dimensions 1022x2044 mm, the load capacity of the motors is 6,000N. The reliable operation of electrical components are protected against moisture ingress (IPX4). The electrical movement can be controlled by remote control accessory, whose operation can be disabled on request, can be switched to "can not be controlled by the patient" mode. Setting of the height is between 400-800 mm. Optional available (for the bed): patient's bedside handrail, extension frame, bedding holder, mattresses.

Scissor rehabilitative beds

Scissor lift rehabilitative beds

Electrically operating, scissor lifting structured nursing bed. The lying surface is divided into 4 parts. The backrest of the devided lying surface is tiltable, the footrest can be raised and 10-way adjustable. The lying surface can be adjusted vertically. Position of the backrest and leg section as well as the setting of the lying surface height are remote-controlled with an electric motor. The bed's load-bearing structure is a metal frame welded from a hollow sections, which surface is coated with electrostatic powder coating. The lying surface is made of steel grid reticulated design. Moving of the bed is possible by lockable, large wheels.

Hospital beds

Electric hospital beds

Electrically operating, scissor lifting structured ward bed. The lying surface is divided into 4 parts. The backrest of the devided lying surface is tiltable, the footrest can be raised and 10-way adjustable. The lying surface can be adjusted vertically. Position of the backrest and leg section as well as the setting of the lying surface height are remote-controlled with an electric motor. The bed's load-bearing structure is a metal frame welded from a hollow sections, which surface is coated with electrostatic powder coating. The lying surface is made of steel grid reticulated design. Moving of the bed is possible by lockable, large wheels. Bed ebds are made from metal grid and metal, wood decor inserts .

Fixed hospital beds

Fixed height hospital beds

Ward beds with fix height, metal grid and with a bed end made from metal, wood decor inserts. The bed is divided into 2 parts with fix height metal frame structure, mechanically from 0 to 50 degrees, in 6-position adjustable head part, with metal bed frame, height-adjustable metal side rails on both sides. Size of the lying surface: 90x200cm, height 45cm (without mattress) in fixed and roller versions available. Optional available (for the bed): patient's bedside handrail, bedding holder, mattresses. The components are water-resistant, washable, disinfectable!

Wardrobes, storing cabinets

Wardrobes, storing cabinets

ASS cabinets are made in a wide size range and according to different storage functions. The carefully selected components and assemblies provide an aesthetic appearance, as well as a stable, reliable operation

Wardrobes

Wardrobes

The clothing storage cabinets play an important role in institutional and home care. A variety of hanging and shelved cabinets designed to provide systematic storage of clothing. The size selection of the cabinets offers a varied range of layout options.

Bedside tables

Bedside tables

ASS bedside with a foldable sheet where a patient can eat, it is an additional accessory of the patient beds that is optional orderable. Universal right-left available, in addition to both sides pull-out drawers, at the bottom 2 full door with a shelves area that can be open on both side. The tabletop is 16 mm thick. Click Roll Cap furniture panel, with 2 long edge bumper lath, to prevent slipping of the objects placed on it. Mobile roller design, with 4 castors, 2 of them with brakes. WIth fixed-height foldable table top. Furniture boards color: beech decor. (size: 511x425x820mm)

Chests of drawers

Chests of drawers

ASS Poli Box plastic drawer with storage cabinets providing simple structured storage under all conditions. The plastic drawers are hygienically cleanable, can be varied. Optional drawer colors: red, blue, yellow, green, beige

PAGHOLZ beech formseat

PAGHOLZ formseat

PAGHOLZ manufactured by ASS made from real hornbeam lumber chairs provide an ergonomically correct seating mode, various forms of mantle and wide range of colors, provide an aesthetically pleasing and a healthy environment in the home and in institutional use. Basic colors are: light and dark beech. The seat elements obtain their final surface during the manufacturing process , which is very tough, shock and fracture resistant, scratch and abrasion, does not splinter, chemical resistant, flame-retardant, self-extinguishing, UV-stable, light-resistant and colorfast. Subsequent surface treatment is not required! Easy to clean and disinfect well. Keeps its aesthetic real wood grain and color. Specifically recommended for health use.

Armchairs, chairs

Armchairs, chairs

Sturdy powder-coated metal frame design, upholstered seat, leather upholstery on demand, we recommend their use in rooms, public space .

Waiting-room bench

Waiting-room bench

PAGHOLZ real beech wood seat elements designed for 2-3-4 persons, powder-coated metal frame, their use is recommended in lobbies, corridors, public space

Work chair

Work chair

Roller or foot fixed, rotating, air-cushioned chairs, PAGHOLZ beech or AEROLINO plastic egypalásttal mounted , powder-coated metal frame. Our working chairs are recommended for office, laboratory and home office use.

Wooden chair

Wooden chair

Beech upholstered wooden frame chairs,in variety forms,optional in marinade and upholstery colors. Note that the wooden frame chairs are not stackable!

Tables

Tables

With metal and wooden structure, the table top can be laminated or veneered furniture panel, they are made in different sizes and form design like square, rectangular, trapezoidal, triangular. The table shapes provide a varied layout options in rooms, restaurants and public spaces.

Metal desks

Metal desks

Dining. preparing, reading and general-purpose tables, laminated furniture panel with roof, powder-coated metal frame, on demand roller version as well.

Desks

Desks

Desks for home and office use, nurse tables, small cupboard with lockable shelves, shelf deposits, if required in plastic drawer version available.

Wooden desks

Wooden desks

Solid beech foot structure, laminate or veneer table top, in different sizes and colors.

Auxiliary furniture, accessories

Auxiliary furniture, accessories

For the ASS MEDICAL rehabilitation beds variety of accessories are available which makes the beds much more comfortable: patient handrail bracket pull-out bracket sheets, side grid sets, extension sets framework.

Bed linen holder

Bed linen holder

Bed linen holder are made by takng into consideration the local conditions and needs, in two basic versions. The roller drawer design, made of laminated furniture panel s recommended primarily for home and sanatorium care beds. For the structure of the bed an be connected and expandable pull-out metal Bed linen holder, can be used for motorized beds used, in powder-coated metal truss design.

Metal frame

Metal frame

Made in short 144 cm and 190 cm extended version, height is adjustable in 2-position, powder-coated metal tubular frame structure.

Medical devices

Mattresses

Mattresses

For our beds, we offer a variety of health mattresses. Optional standard health and incontinence antidecubitus mattress cover. The incontinence cover is also available separately!

Medical mattress

Normal medical mattress

Mattresses are made of a special fund, it is a soft polyurethane foam developed for hygiene purposes. Its dense lattice structure ensures proper hardness, flexibility. As a result of the open cell's expansion with the cessation of pressure cells are loaded again, so durability is guaranteed. As a result of the SANTITIZED treatment it is antibacterial and antifungal, so it is anti-allergic. Key features: enabled by the Medical and Hospital Technical Institute, has developed for medical purposes, by special treatment it is antibacterial and antifungal, so it has a hypoallergenic effect, its long-term flexibility guaranteed, 95 degrees washable, sterilizable by autoclave at 120 degrees, 12 cm thick.

Decubitus Mattress

Anti Decubitus Mattress

The antidecubitus mattresses are made of a multicomponent, special fund, it is a soft polyurethane foam developed for hygiene purposes. During the production receives a SANITIZED treatment, which makes it antifungal and antibacterial. Due to the open cell's expansion, dense and homogeneous cell structure, durability is guaranteed. The design of the special three-dimensional pyramid structure is made of cold-worked. Key features: enabled by the Medical and Hospital Technical Institute, has developed for medical purposes, by special treatment it is antibacterial and antifungal, so it has a hypoallergenic effect, its long-term flexibility guaranteed, pressure distribution, as well with the help of self-ventilation ensures very effectively to prevent decubitus, the acceleration of the healing of the already existing decubitus, 95 degrees washable, sterilizable by autoclave at 120 degrees, 12 cm thick.

Incontinence cover

Incontinence cover

Raw material of the incontinence cover: 58% PU 42% PES. Thanks to the properties of the material, provides a permanent sanitary protection, increase patient's comfort. The cover color an be chosen from a color sample. (White) Key features: due to special handling it is antibacterial, antifungal, does not absorb, reported thereby a protection against various bodily fluids, secretions contrast, ventilated, so that the patients do not sweat in it, reduces the feeling of warmth, gives freshness, self-deodorizing, flame retardant, with surface disinfection can be cleaned, washable in washing machine at high temperature , sterilizable by autoclave at 134 ° C for 5 minutes.